Your Norma Jean cabinet has a durable design with composite construction and wood grain laminates. You can sew in any position you want with the EZ-Lift air mechanism.
Press down to sew flatbed, free-arm at any height and store your machine effortlessly
Your new Norma Jean cabinet will accommodate machines up to 12” front to back, 22 3/4” wide and 14”tall
Fold out leaves provide additional work surface and are supported by sturdy snag free hinges and leaf supports
Your cabinet has casters for greater portability and stability when locked
You’ll find plenty of room with four drawers, four notion trays and a conveniently recessed compartment on the top work surface
Needed for assembly: Screwdriver, mallet, wrench, step-by-step instructions, 2 hours and your toll-free help line
Curious if your sewing machine will fit in the cabinet? Double check your machine’s measurements with ours listed here. Measurements cannot exceed 12” front to back/ 22 3/4” left to right and 13 1/8” tall.
Open: 81 1/2” wide x 19 3/4” deep x 30 1/2” high
Closed: 41 1/2” wide x 20” deep x 31” high
Drawer Dimensions: 10 5/8” wide x 16 1/8” deep x 3 3/8” high
*Quilt Leaf Extension for back of cabinet available
The following sewing machines do not fit the Norma Jean Cabinet:
Bernina: Series 7- 780, 750 QE, 710
*The machines will fit the opening and platform of the cabinet but the height of the machine does not allow the top right leaf to close completely when the machine is in storage position.
Brother: Dream VX8500D
Janome: Horizon Memory Craft 15,000
*The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine.