50% OFF ANY ONE REG-PRICE ITEM* 50% OFF ANY ONE REG-PRICE ITEM*
2 Minute Dye Tassel Baskets
SUPPLIES & TOOLS:
- Tulip Two-Minute Tie Dye Kit
- 100% cotton yarn
- Hot glue gun
- Scrap cardboard
- Small mesh laundry bags
- For best results, please read all instructions before beginning project. Refer to photo for color and design placement.
- Cut a piece of cardboard to the length you want your tassels to be – we used a 3" square, but you can adjust this if you want a bigger or smaller tassel to best suit your baskets. Cut a piece of yarn and tie it once around the cardboard tassel maker.
- Wrap yarn around the cardboard, perpendicular to the yarn you just tied, about 45 times. We used a variegated yarn here, but you can use any color you like, keeping in mind that lighter colors will show the dye better. You can even mix and match colors of yarn within one tassel if you want.
- Untie the single yarn and pull out the one tail. Make a double knot with the two ends, cinching the tassel together as shown.
- Slide the yarn off of the cardboard. In one hand, hold the tied section of the tassel – this will be the top – and with your other hand, use a pair of sharp scissors to cut through the loops of yarn, making sure to cut directly opposite the knot you’re holding.
- To make a nice and tidy-looking top for the tassel, split the yarn on one half down the center, almost like you’re parting hair. Fold the yarn over and spread it evenly around so that your tassel is even and resembles a cute yarn version Cousin It.
- Cut another piece of matching yarn and tie a double knot snugly around the top of the tassel. Use the long tail end to wrap around the tassel two more times and then use glue to secure it next to the knot at the back of the tassel. Trim any excess yarn.
- Use sharp scissors to even out the bottom of the tassel.
- Repeat using different yarn until you have as many tassels as you want for your baskets.
- Place the finished tassels in a bowl and fill with water, making sure every tassel is fully submersed and wet throughout.
- Time to prepare the dye! Simply add water to each of the bottles and shake until well combined.
- Wring the excess water from a tassel and hold it over a basin or your work surface. Gently squeeze dye onto the bottom of the tassel to create a dip-dye look. Do this for all the tassels, using different color combinations and even dyeing the tops instead of the bottoms if you like.
- Arrange the dyed tassels in the plastic containers included in your kit. We arranged the darker colors (blue and green) together in one and the yellow and fuchsia in the other. Close the lids and, one at a time, follow the guidelines in the instruction booklet for your microwave.
- After allowing the containers to remain closed for 15 minutes as per the instructions, open them and allow to cool for 5 more minutes. Rinse the excess dye from each of the tassels and place into mesh laundry bags. Put in the washing machine on the gentle/delicate cycle and wash. We set our washer to the small load setting and added a few dark colored items to fill the load a little bit. Remove the tassels from the mesh bag and shake them out and untangle them with your fingers as necessary. Arrange on a wire cooling rack and let dry overnight, or until completely dry.
- Hot glue onto the baskets as desired.